香港乒乓網 - Powered by Discuz! Board

標題: [砌版討論] HELP [打印本頁]

作者: UC101 時間: 2012-6-1 02:41 標題: HELP

如果塊板之前虎磨多左，有無D咩野可以填補番(好似D日直咁)
THZ

作者: iacentre 時間: 2012-6-1 03:07

Blu Tack - it will look not nice of the blade, but it will fill it up and enhance the feeling of handle.

作者: stephen1019 時間: 2012-6-1 11:16

UC101,

司兄, 虎口磨多左, OK....虎口重塑GoGoooo.....

到模型鋪買慢亁畢地, 2片泥膠物體, 搓埋一舊"PUTTY"落去磨深左既虎口位, 等半日後先慢慢用手指搓下搓下, 出個原形. 1日後又再搓下, 出個DETAIL位.2日後, 用水磨沙纸磨靚仔佢, 待3日後, "PUTTY" 亁左後系硬到冇朋友.....THUS, .虎口重塑完成.DRAW....

[ 本帖最後由 stephen1019 於 2012-6-1 12:59 編輯 ]

作者: iacentre 時間: 2012-6-1 11:36

引用:

原帖由 stephen1019 於 2012-6-1 11:16 發表
UC101,

司兄, 虎口磨多左, OK....虎口重塑GoGoooo.....

到模型鋪買慢亁畢地, 2片泥膠物體, 搓埋一舊"PUTT"落去磨深左既虎口位, 等半日後先慢慢用手指搓下搓下, 出個原形. 1日後又再搓下, 出個DETAIL位.2 ...

What are the English term for 畢地, and 泥膠物體 respectively?

作者: ninthuncle 時間: 2012-6-1 11:54

Tamiya Modelling putty for wood.

作者: iacentre 時間: 2012-6-1 12:15

引用:

原帖由 ninthuncle 於 2012-6-1 11:54 發表
Tamiya Modelling putty for wood.

Many thanks. I did a search through eBay. Could anyone know which one (style) listed below exactly work for the blade?

87027 - Polyester Putty
87043 - Cleaning Putty
87051 - Epoxy Putty - Quick Dry Type
87052 - Epoxy Sculpting Putty - High Density Type
87053 - Putty - Basic Type
87076 - Light-Curing Putty
87095 - Putty (White)
87097 - Tamiya Polyester Putty (40g)
87112 - Craft Spatula (20mm Width)

作者: stephen1019 時間: 2012-6-1 12:59

牌子: Tamiya Epoxy Putty, some kind: 87051-52

作者: UC101 時間: 2012-6-1 23:52

引用:

原帖由 stephen1019 於 2012-6-1 11:16 發表
UC101,

司兄, 虎口磨多左, OK....虎口重塑GoGoooo.....

到模型鋪買慢亁畢地, 2片泥膠物體, 搓埋一舊"PUTTY"落去磨深左既虎口位, 等半日後先慢慢用手指搓下搓下, 出個原形. 1日後又再搓下, 出個DETAIL位. ...

Really thank for ur help

歡迎光臨香港乒乓網 (http://www.hkttf.com/)